Just what is needed in a backlight. The front screen is only 22 inches high, so you can place the Barger LiteStrip backlight where desired and not be in the shot.. With one of the available grids, you have the light control needed. Place one LiteStrip behind or over the camera, add a grid of choice, switch on the necessary bulbs, and you’ve got a selective slice of light. Need a soft slice of light for a key without all the flagging? Select the degree of light control you want via the grid, and you have the soft light on the subjects’ faces and not on their clothing.
Compact and Lightweight. Works Either Horizontally or Vertically. The 6-LiteStrip is only 34 inches wide x 16 inches high x 12 inches deep. The 6-LS 3 PC uses six 650 watt 120 volt lamps (FRK) or 240 volts. So it can easily work in either a horizontal or vertical position. And It has the same reflector and tray design as the V2 standard models, with more light out the front and more heat out the rear. The speed ring is built in.
31`` from back to front: From the back of the light to the front of a medium Chimera is 31”.
An improved vent setup from Chimera: allows hot air to escape, increasing the life of the 6-LiteStrip, while controlling light spill on the set
Control spill light: You can now tuck the Chimera side flaps in the convenient flap holder to control spill light.
Combo Pin Steel lock Washer: When space is at a premium, the combo pin provides the flexibility to use
a baby light stand or a grip stand. The steel lock washer improves the same great lock-off strategy with a large easy-to-grip handle and a linear bearing to reduce friction when tightening.
49`` Wide with a medium Chimera: The front of the 4-LiteStrip with a medium Chimera is 49” wide. With four 650 watt 120 volt (FRK) bulbs or 240 volt (FRM) bulbs at 500 ASA at 1/50th of a second, you get an F8 at 5 feet, F4 at 10 feet, and F2.8 at 15 feet.
Wider reflectors: create better light distribution, and are vented to keep the bulb seals cooler for longer life
Finned socket holder: design helps radiate heat away from the socket and bulb seal area.
Tall Switch Guards: a great feature on all BargerLite products. Likewise, double pole switches to adjust light levels, and rugged, heat-resistant wood handles
Offset the light: by using the combo pin and placing it in the side of the ball
Protective front cover: Super durable and lightweight front cover protects the safety screen and bulbs when in transit.
On the 240-Volt version: the three power cables (CE) come ready
to install the preferred regional plug
in 120 or 240 volt versions,
Socopex connector: a 19-pin Socoplex connector is available
PHOTOMETRICS: The 6-LiteStrip with six 650-watt, 120 volt FRK/240 volt FRM/230 volt FRL 500 ASA @ 24 FPS @ 1/50th of a second